Manually configure IPv6 TCP/IP parameters from the control panel
Use the control-panel Administration menus to manually set an IPv6 address.
1.
On the product control panel, press the Home button.
2.
To enable manual configuration, open the following menus:
●
Administration
●
Network Settings
●
Jetdirect Menu
●
TCP/IP
●
IPV6 Settings
●
Address
●
Manual Settings
●
Enable
Select the On option, and then press the OK button.
3.
Select the Address option, and then press the OK button to open a keypad.
4.
Use the keypad to enter the address.
5.
Press the OK button.
ENWW
Configure IP network settings
111